The options to create a Default Building are:
1. Place just a Network Termination (NT) [NT Options].
2. Place a NT, with a chosen Cable & Duct to the selected Manhole/Pole, with a chosen Joint Closure automatically created with connections to NT.
3. Place a NT, with items in 3, but also adding an ONT with a chosen patch between the NT and ONT.
4. Place just an ONT [ONT Options].
5. Place a ONT, with a chosen Cable & Duct to the selected Manhole/Pole, with a chosen Joint Closure automatically created with connections to ONT.
6. Place just a Microwave.
7. Place a Microwave, with a chosen Cable size to the selected connecting Microwave.
When placing a Default Building you don't get the option to place the outline, just a point that you can modify if needed.
Click Ok and the footer will prompt with steps.
In this example the manhole has no existing Joint Closure, so a new Joint Closure is created.
If it did; there is an option to choose the existing Joint Closure.
The Building name will now appear in the Tree, with the NT underneath to indicate it is attached to it.
The ONT is connected, via patch, to the NT; so the ONT is underneath the NT to indicate it is attached to it.
Click on the building to modify the outline by selecting Edit.
Adjust the boundary outline until the desired edit.
Ensure you click the Complete button to save the Edit change.
