<< <%SKIN-STRTRANS-SYNTOC%> >> Navigation:  »No topics above this level« Introduction

Please ensure the data you require to run a test has been loaded by following the Element Manager Data Build Guide before you continue.

 

Element Manager Data Build Guide covered the building of Locations, Sub-Locations, POP-Locations, POPs.

It also covered adding UTEL Equipment along with creating Test Configurations, adding Routes and OLTs.

 

This guide will explain how to run or schedule tests on your network. The results allow you to detect faults on the line, pin-pointing the location and specific cable that is causing it.